User manual

2. You can switch to a diﬀerent size ear tips to ﬁnd the ones that suit

you most (size M is installed by default).

Note: Aer using the earphones, place them back into the charging

case. This will extend their lifespan and help you avoid losing or

misplacing them.

Connecting

● Connecting the earphones to a new device

① Remove the earphones from the charging case when using for the

ﬁrst time, the earphones automatically enter the awaiting connection

mode. Place the earphones into the charging case, then press and

hold the buon for 2 seconds. Once the charging case indicator starts

blinking, the earphones are waiting for a connection.

② Enable the device's Bluetooth, then locate and connect to "Mi TW

Earphones Lite". If a passcode is requested, enter "0000".

● Connecting the earphones with a Mi phone

Make sure your Mi phone is unlocked and its Bluetooth function is

enabled. Place the headphones into the charging case, and then keep

close to the Mi phone. Press and hold the buon for 2 seconds, follow

the on-screen instructions to connect the earphones to your phone.

Note: The feature of fast connection is currently only supported by

some Mi phones, please update your Mi phone to the latest stable

version.

● Automatic connection

While removing the earphones from the charging case, the earphones

will automatically connect to the most recently used Bluetooth

device. If no connection history is detected, or if the earphones

cannot successfully connect to any Bluetooth device, the earphones

will automatically enter the awaiting connection mode.

Note: If the earphones cannot automatically connect to a device, you

will need to manually connect the earphones to the desired device via

the device's Bluetooth seings.

● Connect to a new device

Place the earphones into the charging case, then press and hold the

buon for 2 seconds. The indicator starts blinking white and the

earphones enter the awaiting connection mode. Enable the Bluetooth

on your device, then connect the earphones with your device.

● Clearing connection history

Place the earphones into the charging case, then press and hold the

buon for 10 seconds to clear the connection history of the

earphones. The indicator stays white for 5 seconds then starts

blinking white, then earphones enter the awaiting connection mode.

Due to the connection characteristics of the Bluetooth signal, in

dense environments with 2.4 GHz electromagnetic signal

interferences, there may be occasional disconnects or no sound.