Operation Manual

小米路由器 mini（r1c）初始化设置&刷机流程

Process of Initialization settings & upgrading firmware in handset for r1c

Attention:don’t cut off the power during the whole process

Step 1:connect the router to the power supply and cut the cable into the Internet port on

the router (the blue one)

Step 2:connect your computer to the wifi named “xiaomi ” or with a cable to the LAN

port on the router

Step 3:open the browser and enter the url: www.miwifi.com

Step 4:set your router as following steps

XIAOMI-MI.COM

PAGE 1
I.C OM 小米路由器 mini（r1c）初始化设置&刷机流程 Process of Initialization settings & upgrading firmware in handset for r1c Attention:don’t cut off the power during the whole process Step 1:connect the router to the power supply and cut the cable into the Internet port on the router (the blue one) Step 2:connect your computer to the wifi named “xiaomi ” or with a cable to the LAN port on the router Step 3:open the browser and enter the url: www.miwifi.
PAGE 2
OM I.
PAGE 3
OM I.C I-M tips:if you want to set the same password as the wifi password, just make a tick in the frame before the words “与 Wi-Fi 密码相同”. XI AO M wait a minute until you see the following interface. Now, you have finished the initialization settings. Then, go to the next step to download the version you need.
PAGE 4
OM I-M I.C waiting a while, the step perhaps needs 5~8 minutes. If you see the next interface, it means the operation has finished. XI AO M Step 5:set the system language select English as the system language.