User manual

Smart Dog Button Tag
About the device
1. Installing a battery
User`s Guide
Front
Back
Knob battery
Open plate
Medallion holder
Place the opening plate in special chute to open
the battery cell
Place the battery positive pole «+» to battery cell
panel, then close a cell panel so that the location of
the black dots shown in it, coincided with the chute
location. Pull a panel and you hear a click.
When «red, green, blue» indicators light up one after
another, it will indicate the successful installation of
the device.
2. Installing mobile app and pairing devices.
Scan the QR-code to download «Smart Dog Button
Tag» application.
After successful installation of the device, open
mobile application and follow the recommendations
of the «Smart Dog Button Tag». When you see
«smartphone ash» in phone interface, you must
conrm a pairing. If you see a ash, it will indicate
that the connection is successfully completed.
3. Connecting to Мi Smart Home
Find «Mi Smart Home» app in App Store or scan the
QR code to download and installation the app.
To nd and buy more smart devices, visit and register
on Xiaomi-mi.com, or buy via Mi smart Home app.
Installing the device to holder
Easily push the device till it fully enters into the
holder.
Note: White side of the device must be outside.
XIAOMI-MI.COM