User Manual
Table Of Contents
- Contents
- 1 Getting Started 19
- 2 Using the iX104 33
- 3 Maintaining the iX104 73
- Welcome
- 1 Getting Started
- 2 Using the iX104
- Turning on the computer
- Turning off the computer
- Suspending and resuming operation
- Using the pen
- Using the joystick (the navigation control key)
- Changing the screen orientation
- Adjusting the screen brightness
- Docking the iX104
- Connecting devices
- Using the battery
- Programming hot keys
- 3 Maintaining the iX104
- A Troubleshooting
- B Using BIOS and AOS Functions
- C Glossary
- D Hardware Specifications
- E Agency Notices
- Index
iX104 User’s Handbook 85
B Using BIOS and AOS
Functions
This appendix explains how to use the application and navigation
buttons with the Basic Input-Output System (BIOS) program and the
Advanced Operating System (AOS) Options menu.
Note
These functions are typically for use only by your system
administrator or by authorized service technicians.
Table 9 Using BIOS and AOS functions
Use this button... To perform this function
To start the BIOS program: When the
computer is booting, press the P2 button
and follow the instructions that appear on
the screen.
Navigate. (You can also use the joystick to
navigate, as described below.)
Push the joystick control up, down, left or
right to move a highlighted item accordingly
(the same as pressing the arrow keys on a
keyboard).
Press the Enter button to perform the same
functions as pressing Enter on a keyboard.