VERTICAL ADVERTISEMENT BLOWER OWNER’S MANUAL BR-430, BR-450, BR-460, BR-430L, BR-450L, BR-460L XPOWER MANUFACTURE, INC. 240 Clary Avenue San Gabriel, CA 91776, USA Tel: 626-285-3301, Fax: 626-285-3302 www.xpower.
XPOWER BR-430(L), BR-450(L) and BR-460(L) series blowers are designed for vertical advertisement inflatables. The model BR-460(L) is ETL/CETL certified. Features: • Low power draw with an high velocity air flow up to 5800 CFM • Super compact and lightweight motor design • Easy carry with 2 built-in handles • Power cord lengths are 15’ for 430 and 450 models, and 25’ for 460 models • Easy Cord wrap • 4 lockable wheels on a unitary roller base for 450 and 460 models • 2-speed switch for 450 and 460 models.
XPOWER Vertical Advertisement Blowers are used to inflate advertising sleeve units. Durable and easy to operate with an effective balance of static pressure and airflow. The units are suitable for a variety of advertising applications with or without high intensity, internal sleeve illumination. 1. XPOWER Vertical Advertisement Blowers are shipped ready-to-use. Before plugging the unit into the power source, inspect completely for any shipping damage. 2.
WARNING: IMPORTANT SAFETY PRECAUTIONS! PLEASE READ COMPLETELY BEFORE USING PRODUCT! When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including, but not limited to the following: 1. To prevent electric shock, do not operate the unit in standing water. Never plug in or unplug the unit with wet hands or while standing in water. 2. To avoid risk of injury, do not direct air flow at face or body. 3.
1. 2. 3. 4. To keep the unit clean, use a damp cloth to wipe the surface of the housing. Never clean the Advertising Inflatable Blower with water. When not in use, unplug and store the Advertising Inflatable Blower in a dry indoor place. Always disconnect the Advertising Inflatable Blower from its power source before performing any maintenance or cleaning.
Model BR-430 BR-430L BR-450 BR-450L Volt / Frequency 115 V / 60 Hz Housing PP / Injecti on Mol d Overheating Protection Dua l Therma l l y Protected BR-460 Power 1/3 HP 1 HP Amp 4.2 Amps 8.3 Amps Rated Airflow 2800 CFM 5800 CFM Speeds One Two Pull Strap & Wheels N/A Incl . SDSK 41.7 (3 x 13.9) i nch 59.1 (3 x 19.7) i nch BR-460L Cord Length 15 Ft. 25 Ft. Safety Certificates N/A ETL / C-ETL LED Lights N/A Incl . N/A Weight (unit/package) 15/17.1 Lbs 16.3/18.
XPOWER Limited Warranty (USA) XPOWER’s Limited Warranty covers the unit (excludes POWER CORD) from defects in material and craftsmanship. The Warranty covers normal use for a term of one year from the original date of purchase including parts, labor, and one way shipping. Non-contiguous states must pay for roundtrip freight. A purchase receipt must be provided.
Parts List Item No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Parts Name Upper cover LED light ("L" model) Fan Housing Power cord Switch plate LED switch ("L" model) Speed switch Velcro strap (male) Motor Capacitor Base Wheels Support Rod (SDSK) ** Actual parts are not limited on this list, contact XPOWER for ordering parts.
Accessories SDSK (Support Rod for Vertical Advertisement Blower) A Support Rod (SDSK) is included with unit to stabilize the vertical advertising inflatable. The support rod use is optional. However, it is strongly recommended to use the SDSK for large and tall advertising inflatable. The support rod improves vertical stability and prevents complete inflatable collapse. Assembling: Connect 3 pieces of 1.6’ short rods one by one with bushings to complete assembly of SDSK rod.
Warranty Registration (for US user only) For your product warranty, please complete and mail / fax this form to XPOWER MANUFACTURE, INC. Address: 240 Clary Ave., San Gabriel, CA 91776. Tel: 626-285-3301 Fax: 626-285-3302 (For your convenience, register your product online at xpower.
To: XPOWER Manufacture, Inc.