Use and Care Guide

SYMPTOM POSSIBLE CAUSE ACTION
Motor not
running
Switched off
Make sure unit is plugged in and switch is turned to
ON mode
Power failure Check outlet/change to another outlet
Wiring failure Contact XPOWER for service/repair.
Scraping noise
from fan
Obstruction at the intake or exhaust of fan Remove obstruction
Fan broken Contact XPOWER for service/repair
Weak air flow Obstructed vents and/or filters Clean out vents/inlets/filters
Change light
illuminated
Insufficient airflow caused by clogged filters
Replace the filters
Troubleshoo�ng
- 16 -