Use and Care Guide

11
Accessories
X-3400A GFCI Daisy Chain
XPOWER X-3400A Air Scrubber is GFCI daisy chainable with a low 2.8 amp draw.
The 12-amp on-board circuit breaker will allow three (3) additional X-3400A units to run on one circuit at
the same time.
X-3400A Air Scrubber has an on-board Circuit Breaker. If the Auxiliary Outlet overloads, the Circuit
Breaker will trip. If the Breaker does trip, unplug the units and press the Circuit Breaker Reset button. Plug
the units back into the power source and turn on the switch.
Filter Change Light
The Red Filter Change Light will illuminate when accumulated debris is over-saturated, filter needs to be
changed