Operation Manual

TR250_TR350 Treadmill
10
GETTING STARTED:
Power the treadmill on by plugging it into a grounded wall outlet, then turn on the power switch
located at the front of the treadmill below the motor hood. Ensure that the safety key is installed, as
the treadmill will not operate without it.
When the power is initially turned on, the display will light up and then show a software version
number (i.e. 1.0) Then an Odometer reading will be displayed in the Distance window. The odometer
reading shows how many virtual miles the treadmill gone. The time window will display how many
hours the treadmill has been used. The console will now be in idle mode, which is the starting point
for operation.
QUICK START:
After the treadmill is powered on and the safety key is in place simply press the START key. The
treadmill will start at the minimum speed of 0.5 mph, the time will count up from zero and all data will
begin to accrue. You can adjust the speed manually by pressing the Fast and Slow buttons and you
can adjust the Incline with the Up and Down buttons.
Operation of the TR250 Treadmill