Operation Manual

TR250_TR350 Treadmill

 STEP 1

Remove all the parts from the carton and lay the main base frame on a flat level surface.

 STEP 2

Feed the cable from the base frame (38) through the right side upright tube (5) and slide the tube into

the base frame tube. Be careful not to pinch the wire harness. Install the left upright tube (4) and

just hand tighten for now all eight 5/16 x 1/2 bolts (94) and the six 5/16 flat washers (110) for the

side bolts and two 5/16 curved washers (95) for the front bolts. Tighten all eight bolts as tight as

possible.

110