Security Datasheet

Jauch Quartz GmbH • email: [e-mail]
www.jauch.com
This information is generally descriptive only and is not intended to make or imply any
representation, guarantee or warranty with respect to any cells and batteries. Cell and battery
designs/specifications are subject to modification without notice. Contact JAUCH for the latest
information.
RoHS compliant
Pb free
REACH
compliant
Conflict
Mineral free
Jauch Battery Solutions
• Reliable energy for your application
• Standard cells and customized packs
• ESD protection
• Battery Certification Experts
- When discarding batteries with solder tags, insulate the tags by wrapping them with
tape, foil, etc.
Storage:
- Store unused batteries in their original packaging and keep them away from metal
objects which may short-circuit them. Storing unpackaged cells together could result
in cell shorting and heat build-up.
- Store and display batteries in their original packaging in well ventilated, dry and cool
conditions.
- Avoid storing or display batteries in direct sun or in places where they get exposed to
rain
- Do not stack battery cartons on top of each other exceeding a specified height. The
height is clearly dependent on the strength of the packaging. As for general rule this
height should not exceed 1.5 m for cardboard packages or 3 m for wooden cases.
The above recommendations are equally valid for storage conditions during
prolonged transit. Thus, batteries should be stored away from ship engines and not
left for long periods in unventilated metal box cars (containers) during summer.
Section VIII – Exposure Controls / Personal Protection
Respiratory protection (specify type): Not necessary under conditions of normal use
(see section VI)
Ventilation: Not necessary under conditions of normal use
(see section VI)
Protective gloves: Not necessary under conditions of normal use
(see section VI)
Eye protection: Not necessary under conditions of normal use
(see section VI)
Other protective clothing or equipment: Not necessary under conditions of normal use
In the event, however, electrolyte should be released by mechanical or electrical abuse, use:
Respiratory protection Mask (with a filter preferably)
Hand protection Synthetic rubber gloves
Eye protection Goggles or glasses (see section VI)
Section IX – Physical and Chemical Properties
The chemicals mentioned in Section II are contained in a sealed can. Under conditions of
normal use, the chemicals will not be released.
Appearance: single cell in metal can
Nominal voltage: Single cell: 3.6/3.7 volts