Instructions / Assembly

ManualsBrandsXtremepowerUS ManualsConcrete Drilling Tools2200-Watt Heavy-Duty Electric Demolition Jack Hammer Concrete Breaker with Shovel

2200W DEMOLITION JACK HAMMER WITH CLAY SPADE SHOVEL

SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,

OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S

SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH

AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).

OWNER’S MANUAL AND SAFETY INSTRUCTIONS

ITEM: 61116-XP

FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: (909) 628 0880 MON-FRI 9AM TO 3PM PST

Summary of content (10 pages)

PAGE 1
2200W DEMOLITION JACK HAMMER WITH CLAY SPADE SHOVEL ITEM: 61116-XP OWNER’S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).
PAGE 2
IMPORTANT SAFETY INFORMATION GENERAL SAFETY WARNINGS Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. SAFETY The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur.
PAGE 3
IMPORTANT SAFETY INFORMATION Stay alert, watch what you are doing and use common sense when operating a power tool. DO NOT use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Use personal protective equipment. Always wear eye protection.
PAGE 4
IMPORTANT SAFETY INFORMATION Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a ″live″ wire will make exposed metal parts of the tool ″live″ and shock the operator. Keep clear of moving parts. Avoid unintentional starting. Prepare to begin work before turning on the tool. DO NOT leave the tool unattended when it is plugged into an electrical outlet.
PAGE 5
FEATURES AND SPECIFICATIONS MAIN HANDLE CHISEL LOCK POWER SWITCH POWER CORD SIDE HANDLE Assembled Product Dimensions (L x W x H) 31.00 x 8.00 x 14.00 Inches OPERATION WORK AREA SET UP 1. Designate a work area that is clean and well-lit. The work area must not allow access by children or pets to prevent distraction and injury. 2. Route the power cord along a safe route to reach the work area without creating a tripping hazard or exposing the power cord to possible damage.
PAGE 6
OPERATION 4. EXTENSION CORD: Use an extension cord of sufficient thickness and rated capacity. The extension cord should be kept as short as possible. 5. FEEDING OIL: Prior to using the power tool, remove the oil gauge. This product contains only a small amount of oil when shipped from the factory. 6. MOUNTING A TOOL: Standard tools are recommended for proper operation. 1. Rotate the Stop Lever 180° in a clockwise direction while pulling toward you.
PAGE 7
OPERATION AND MAINTENANCE OIL FEEDING CAUTION: Prior to oil feeding, always disconnect to plug from the power supple. Since an oil chamber is built into this tool it can be used for approximately 20 days without needing to supply lubricating oil, assuming the tool is used continuously 3-4 hours a day. Feed oil into the oil tank as described below using this tool. 1. Just before oil is no longer visible in the oil gauge window when holding this device upright, be sure to refill oil. 2.
PAGE 8
PARTS DIAGRAM 8
PAGE 9
PARTS LIST 9
PAGE 10
WARRANTY PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.