Instructions / Assembly
4
Assembled Product Dimensions (L x W x H) 31.00 x 8.00 x 14.00 Inches
POWER SWITCH
CHISEL LOCK
SIDE HANDLE
POWER CORD
MAIN HANDLE
OPERATION
1. Designate a work area that is clean and well-lit. The work area must not allow access by children or pets
to prevent distraction and injury.
WORK AREA SET UP
2. Route the power cord along a safe route to reach the work area without creating a tripping hazard or
exposing the power cord to possible damage. The power cord must reach the work area with enough extra
length to allow free movement while working.
3. Secure loose work pieces using a vise or clamps (not included) to prevent movement while working.
4. There must not be objects, such as utility lines, nearby that will present a hazard while working.
PRIOR TO OPERATION
1. POWER SOURCE: Ensure that the power source to be utilized conforms to the power requirements
specied on the product nameplate.
2. GROUNDING: This tool should be grounded while in use to protect the operator from electric shock.
This tool is equipped with a three-conductor cord and grounding plug to t the proper grounding receptacle.
The green (or green and yellow) conductor in the cord is the grounding wire. Never connect the green (or
green and yellow) wire to a live terminal.
3. POWER SWITCH: Ensure that the power switch is in the OFF position. If the plug is connected to a
power receptacle while the power switch is the ON position. The power tool will start operating immediately,
possible causing serious injury.
FEATURES AND SPECIFICATIONS