Replacement Part List

OPERATION

1. Push the fuel switch to “ON”.

STARTING THE ENGINE

2. Push the chock lever to “OFF”. 3. Move left the throttle lever a little.

4. Start the engine. ROPE HANDLE STARTER: Push the engine switch to “ON”. Pull slightly the starting

rope handle up until feeling anti-action, and then make a rapid pull. Releasing the handle suddenly may

make it hitting the engine. Release the handle slowly conforming to its recoiling force.

ELECTRIC STARTER: Push the engine switch to “START” and remain

there until the engine Start.

CAUTION: Use the engine switch not more than 5 second each time to avoid

damage of the engine. Try once more 10 second later after last attempt

failures. Once the engine starts, reset the engine switch to “ON”.

1. Preheat the engine and push back the 2. Set

the throttle lever in proper position to ensure

choke lever to “ON”.

2. Set the throttle lever in proper position to ensure

choke lever to the engine runs at required velocity.