Replacement Part List

DIAGRAMS AND SPECIFICATIONS

NOTE: The appearance of your product may vary from the item shown.

MACHINE SYMBOLS: For safe operation and maintenance, symbols are

carved in relief on this machine. Please take a moment to locate these

symbols on the chainsaw.

a) The port to refuel the “Mix Gasoline”, located on the Fuel Tank Cap

b) The port to refuel the “Chain Oil”, located on the Oil Cap

c) Switch indicator. Flipping the engine switch to the “O” (Stop) direction

and the engine will stop. Located on the rear left of the unit.

d) Choke indicator: Pulling out the Choke knob and the Choke closes.

Located on the rear right of the unit.

e) Chain Oil Adjuster Nut indicator: “MIN” directs the oil ow decrease.

“MAX” directs the oil ow’s increase. Located on the bottom of the

clutch side.

f) H-Needle indicator: The position of the L-Needle and position of the

Idle Adjusting Screw. Located on the rear left on the unit.