Instruction Manual

Description of individual modules
Each module can be directly invoked from the reader (data is transferred automatically). If the module
is invoked directly, the file to be processed can be read by clicking "File – Open...”.
Airpressure-compensation (Airpressure-Comp.)
In this module one or more (if invoked from the Reader) files are compensated for air pressure. The air
pressure is taken either from a previously created "*.idc” File, or a fixed air pressure (constant) is used
for compensation.
If the air pressure data file read in contains measured values from a device of the type DCX-22 AA,
then Channel P2 is the "Channel with airpressure”.
Click Convert to compensate each file with the selected air pressure.
Warning!
No new files are created, instead the values in the current files are overwritten. In addition a mark is
set preventing a second airpressure compensation.
Operating Manual for Logger DCX 4.0 KELLER AG Page 21