Instruction Manual

Creation of text data (Text-Converter)
For display and/or further processing of measured values if required, conversion into a text file is
necessary. This module creates such a file in tab-delimited format with the suffix ".txt". The file can be
opened with any desired editor. It is however recommended that the file be imported into a commonly
used spreadsheet program such as Microsoft Excel for a better overview.
The user has several options:
Write specified channel-names and units into File:
- To extract a smaller set of data, specific channels can be selected.
- Other units can also be specified. A user-defined unit can be specified under "Options –
Configuration – Units", which will be applied to the entire KELLER Logger DCX 4.0 – package.
Write only recorded channels into File:
- The Data Logger was designed for recording 15 channels (at present a maximum of 7
channels are implemented). If this option is not selected, all 15 channels are written out,
whether they contain data or not. Due to this fixed assignment, a user macro or other program
can always access the desired measured values. If this option is checked off, only recorded
channels are written to the file.
Operating Manual for Logger DCX 4.0 KELLER AG Page 23