Instruction Manual

The KELLER Logger DCX 4.0 software package
The software consists of three main programs and additional modules.
Both the configuration programs Writer and WriterWL are used to read and update the settings of the
connected device, as also to start and end recording. WriterWL configures devices for water level
applications, while the Writer is used for making general recordings.
The Reader gives an overview of all records present in the connected device, and reads in the records
selected. Each record read in is stored in a separate file with the suffix ".idc". These files can be read
by all modules for further processing or display.
Each module can be either executed directly from the Reader, or as a separate stand-alone program.
(The desired module can be found in the program folder created during installation).
The configuration program (Writer / WriterWL)
These programs are used for the configuration and starting/stopping of recordings as desired. Since
the only difference between these programs is the water level configuration feature additionally
provided in WriterWL, it is the latter's operation that is primarily described in detail in this manual.
WriterWL
Operating Manual for Logger DCX 4.0 KELLER AG Page 8