Installation Guide

Tools Needed
None. Installation should be done by hand.
Diagram below is for presentation purpose only and may differ from actual
Installation Instructions
1) Check the Stone sink for any defects.
3) Set the Stone sink on top aligned to the countertop hole.
4) Install pop-up drain, check installation manual that come along with the pop-up drain.
5) Insert the drain body into the drain opening of the sink.
6) Insert the rubber washer to the drain body from underneath the countertop.
7) Insert the Metal or Plastic washer next to the rubber washer.
8) Install the Nut and tighten properly. (DO NOT OVER TIGHTEN)
Note: Installation should be done by hand. No tools required.