Operation Manual

10 FT-817ND Operating Manual
FNB-85 NI-MH BATTERY PACK INSTALLATION AND USE
The supplied FNB-85 Ni-MH Battery Pack provides 9.6 Volts of DC power for your FT-
817ND, with a maximum capacity of 1400 mAh.
Installation
1. To install the FNB-85 Ni-MH Battery Pack, first remove the battery compartment cover,
as described previously.
2. Lift out the FBA-28 battery holder, and disconnect the short cable connected to the
FBA-28, as shown in the illustration.
3. Connect the short cable to the mating connector on the FNB-85, and install the FNB-
85 in the battery compartment.
4. Replace the battery compartment cover.
INSTALLATION
FNB-85
FBA-28