Operation Manual

15FT-817ND Operating Manual
NB
Press the key to activate
the receiver’s IF Noise
Blanker.
PWR
Press the key to select
the transmitter power output
level (LOW 1, LOW 2, LOW 3, or
HIGH).
VOX
Press the key to enable
the VOX (voice-operated
transmitter switching system)
in the SSB, AM, and FM
modes.
Press and hold in the key
for 1/2 second to recall Menu
#51 (for setting the VOX Gain
level).
CHG
Press the key to initiate
Battery Charging.
Press and hold in the key
for 1/2 second to recall Menu
#11 (for selecting the Charg-
ing period).
TCH
Press the key to initiate
Tone Search.
AGC
Press the key to select
the recovery time (FAST, SLOW,
AUTO, or OFF) for the receiver’s
AGC system.
MTR
Press the key to select
the display function of the
meter in the transmit mode
(Power, ALC, SWR, or MOD
indication).
BK
Press the key to activate
CW “Semi” Break-in opera-
tion.
Press and hold in the key
for 1/2 second to recall Menu
#17 (for setting the CW Delay
time). At a setting of 10 ms,
operation emulates full QSK
performance.
VLT
Press the key to display
the current battery voltage.
DCH
Press the key to initiate
DCS Search.
–
No function
–
No function
KYR
Press the key to activate
the built-in Electronic Keyer.
Press and hold in the key
for 1/2 second to recall Menu
#21 (for setting the Keyer
speed).
DSP
Press the key to switch
the display between the Large
Character and Small Charac-
ter modes.
–
No function
Key Key Key
8
9
10
11
12
*The Operating Function number in this column does not appear on the LCD.
FRONT PANEL CONTROL & SWITCHES
Display Icons