Operation Manual

16 FT-817ND Operating Manual

MIC Jack

Connect the supplied MH-31A8J Hand Microphone to this jack.

SP/PH Jack

This 3.5-mm, 2-pin jack provides variable audio output for an external speaker (4 Ω ~

16 Ω impedance) or earphones. The audio level varies according to the setting of the

front panel’s knob.

When you insert an earphone plug into this jack, the SP-PH slide switch (lo-

cated to the right side of this jack) MUST BE set to the “PH” position, to pre-

vent the possibility of injury to your ears.

SP-PH Switch

If you use earphones with this transceiver, move this switch to the “PH” position be-

fore inserting the earphone plug into the SP/PH Jack, to prevent injury your ears.

SIDE PANEL SWITCH & CONNECTORS