Operation Manual

61FT-817ND Operating Manual
Menu Item 09
[
ARTS BEEP
]
Function: Select the ARTS beep mode.
Available Values: OFF/RANGE/ALL
Default: RANGE
OFF: No alert beeps sound; you must look at the display to determine current ARTS
status.
RANGE: A high tone beep will sound when the transceiver first detects that you are within
range, and a low beep will sound when the other station goes out of range.
ALL: A high tone beep will sound every time a polling transmission is received from
the other station, and a low beep will sound once when the other station goes out
of range.
Menu Item 10
[
BACKLIGHT
]
Function: Select the LCD lamp mode.
Available Values: OFF/ON/AUTO
Default: AUTO
OFF: Disables the LCD lamp.
ON: Illuminates the LCD lamp continuously.
AUTO: Illuminates the LCD lamp for five seconds when any key is pressed.
Menu Item 11
[
BATT-CHG
]
Function: Select the battery charging time.0
Available Values: 6/8/10 h or 8/10/12 h (hours) (depending on transceiver version)
Default: 8 h or 10 h (depending on transceiver version)
Menu Item 12
[
BEEP FREQ
]
Function: Select the beep frequency
Available Values: 440/880 Hz
Default: 880 Hz
Menu Item 13
[
BEEP VOL
]
Function: Select the beep volume
Available Values: 0 ~ 100
Default: 50
Menu Item 14
[
CAT RATE
]
Function: Set the transceiver’s circuitry for the CAT baud rate to be used.
Available Values: 4800/9600/38400 bps
Default: 4800 bps
MENU OPERATION