Operation Manual

63FT-817ND Operating Manual
Menu Item 21
[
CW SPEED
]
Function: Set the sending speed for the built-in Electronic keyer.
Available Values: 4wpm ~ 60 wpm/20cpm ~ 300 cpm
Default: 12 wpm (60 cpm)
You can set the sending speed according to either of two units of speed (wpm: words per
minute; cpm: characters per minute). To switch units between “wpm” and “cpm,” just press
the knob.
Menu Item 22
[
CW WEIGHT
]
Function: Set the Dot:Dash ratio for the built-in electronic keyer.
Available Values: 1:2.5 ~ 1:4.5
Default: 1:3.0
Menu Item 23
[
DCS CODE
]
Function: Setting the DCS code.
Available Values: 104 Standard DCS codes
Default: 023
Menu Item 24
[
DIG DISP
]
Function: Define the displayed frequency off-
set during DIG (USER-L or USER-U) mode
operation.
Available Values: –3000 ~ +3000 Hz
Default: 0 Hz
Menu Item 25
[
DIG MIC
]
Function: Adjust the audio input level from terminal equipment (such as a TNC or PSK-31
sound card) during DIG (Digital) mode operation.
Available Values: 0 ~ 100
Default: 50
Menu Item 26
[
DIG MODE
]
Function: Select the mode and sideband (if applicable) in the DIG (Digital) mode.
Available Values: RTTY/PSK31-L/PSK31-U/USER-L/USER-U
Default: RTTY
RTTY: AFSK RTTY operation on the LSB mode
PSK31-L: PSK-31 operation on the LSB mode
PSK31-U:PSK-31 operation on the USB mode
USER-L: User-programmed costume operation based on LSB mode
USER-U: User-programmed costume operation based on USB mode
In the USER-L and USER-U modes, you can define the display frequency offset
and carrier frequency offset by menu Items #24 (DIG DISP) and #27 (DIG SHIFT).
MENU OPERATION
DCS CODE
023 025 026 031 032 036 043 047 051 053
054 065 071 072 073 074 114 115 116 122
125 131 132 134 143 145 152 155 156 162
165 172 174 205 212 223 225 226 243 244
245 246 251 252 255 261 263 265 266 271
274 306 311 315 325 331 332 343 346 351
356 364 365 371 411 412 413 423 431 432
445 446 452 454 455 462 464 465 466 503
506 516 523 526 532 546 565 606 612 624
627 631 632 654 662 664 703 712 723 731
732 734 743 754 – – – – – –