Operation Manual

65FT-817ND Operating Manual
Menu Item 32
[
LOCK MODE
]
Function: Select the operation of the front panel’s key.
Available Values: DIAL/FREQ/PANEL
Default: DIAL
DIAL: Locks knob only
FREQ: Locks front panel keys and knobs related to frequency control (such as
and key,
(
A/B
)
key., etc.)
PANEL: Locks all front keys and knobs (except key and key)
Menu Item 33
[
MAIN STEP
]
Function: Setting of the knob’s tuning speed.
Available Values: FINE/COARSE
Default: FINE
You may choose between two speeds for the knob. Selecting “COARSE” doubles
the tuning rate compared to the default value.
Menu Item 34
[
MEM GROUP
]
Function: Enable/disable the memory grouping feature
Available Values: OFF/ON
Default: OFF
When this Menu Item is set to “ON,” the 200 “standard” memory channels are partitioned
into ten Memory Groups, each holding up to 20 memory channels.
Menu Item 35
[
MEM TAG
]
Function: Store Alpha-Numeric “Tags” for the memory channels.
Up to eight characters may be stored. The storage procedure is as follows:
1. Recall the memory channel on which you wish to append a label.
2. Recall this Menu Item [Menu #35 (MEM TAG)].
3. Press the knob momentarily to initiate storing of the Tag (an under-bar will
appear below the first character location).
4. Rotate the knob to select the first character (number, letter, or symbol) in the
name you with to store, then rotate the knob clockwise to move to the next
character.
5. Again rotate the knob to select the next number, letter, or symbol, then rotate
the knob clockwise to move to the next character’s slot.
6. Repeat step 5 as many times as necessary to complete the name tag for the memory.
7. Press the knob to save the A/N (Alpha-Numeric) Tag and exit.
MENU OPERATION