real Living· 1 • 2 3 4 5 6 7 B 9 Yale Real Living• Touchscreen Deadbolt Installation and Programming Instructions 0 Cl e 0 0 0 ,i 0) D w Before you begin )) - 0) @ ~ DOWNLOAD THE BILT APP ® for 3D interactive instructions & to register your product i ------------------------------ x3 #8-32 X 5/16" Machine screws m 81.T Billo cw;;;;; - x4 #7 wood & #8-32 machine x 20mm Combination screws x2 M6x59.
Preparing Door ✓ - ...... ~--....,.._ ....... ........
-0 @ optional -Q Optional Fire Kit Parts For Model YRD620 ONLY @ Installing Optional Fire Cup optional Inside of Door
Installing Latch & Strike Plate 2-3/811 position ~ I I •• -- - -L~-~. I q:0°0 1 II II I I x4 I ;::::31 I [~] :H -- - - I I 2-3/411 position 0 11111 Pull. Press Bolt must be in retracted ~ (unlocked) position. Note ~ horizontal orientation of mechanism. t, \ \ ' ', \ ~, \ 0 o-:;0 ----\ ~ ', 0 0
Installing Touchscreen Escutcheon Inside of Door Outside of Door -Q 1 (.i) Bolt must be in retracted (unlocked) position. Note horizontal orientation of mechanism.
Installing Interior Mounting Plate Loosen screw to remove cover. § 0 .
Attaching the Cable Assembly
Installing Interior Escutcheon x3
{i} ✓ Testing Operation ~ Bolt must be in retracted (unlocked) position before installing batteries.
✓ Testing Operation
Installing Optional Radio Module ~-----------:::::::__ r~i:l~j'............ ---- ......
Installing Batteries & Cover 11 Tighten screw to replace cover. Welcome to Yale Real Living. 11 ---- Congratulations, you've installed the Yale Real Living$ Touchscreen Deadbolt! Turn sheet over for Programming Instructions to customize your product.
Programming Instructions Exterior Escutcheon 1 4 • "P" Key (Return to Previous) 2 3 5 s Interior Escutcheon ~ Low Battery Indicator Lockout Mode e Privacy Mode Button Lock Activation • Master PIN Code must be created before any further programming. Max User Codes = 250 with Network Module. Max User Codes = 25 without.
Creating Master PIN Code Creating a Master PIN Code must be performed upon installation or after resetting the lock to factory default. Programming and use of lock is not possible until this step has been successfully completed. "Register Master Code. Press the gear key to continue. 11 4 !5 !5 7 a a ✓ 0 0 Press@ Enter a 4 to 8 digit PIN code followed by the gear key. 11 11 Enter 4-8 digit Master PIN Code. 1 12 a 4 e e 7 a a "Registered.
Creating User PIN Codes Master PIN code must be created first. *Max user codes =250 with Network Module. Max user codes =25 without. "Menu Mode, enter number, press the gear key to continue.
Unlocking Door with PIN Code Enter PIN Code Press 0 0 Code Chart 1 12 3 4 !5 B 7 B B Duplicate if necessary PIN Code Management (With Network Module - Up to 250 Users) User Type Master User User User User User User User User User User User User User User User - User Name User # PIN Code
Resetting Lock to Factory Default Reset C=:] Button 0 Interior Escutcheon When lock is reset to factory defaults all user codes (including the Master PIN code*) are deleted and all programming features are reset to original default settings (see below). 1. Remove the battery cover and batteries. 2. Remove the interior escutcheon to access the reset button. 3. The reset button (see image at right) is located beside the PCB cable connector. 4.
Factory Settings Settings Factory Setting Master PIN Code Registration required* Automatic Re-lock Disabled Automatic Re-lock Time 30 Seconds Escape Return Mode (Model YRD620 only) Disabled Inside Indicator Light Disabled (Off) Language Setting English Lockout Mode Disabled One Touch Locking Enabled Privacy Setting Disabled Shutdown Time 60 Seconds Volume Setting Enabled (Low) Wrong Code Entry Limit 5 Times "'The Master PIN code must be registered prior to any other programming of
Definitions All Code Lockout Mode: This feature is enabled by the Master code. When enabled, it restricts all user (except Master) PIN code access. When attempting to enter a code while the unit is in Lockout, the RED locked padlock will appear on the screen. Automatic Re-lock Time: After a successful code entry and the unit unlocks, it will automatically re-lock after thirty (30) seconds. Inside Indicator Light: Located on the interior escutcheon.
Model YRD620 Feature Programming Through Menu Mode Using Master PIN code* 1. Touch screen with back of hand or palm to activate. ~ 2. Enter 4-8 digit master PIN code* followed by@ key. Lock Response: "Menu mode, enter number, press@key to continue." 3. Enter digit corresponding to the function to be performed followed by the@ key. Follow the voice commands. *The Master PIN code must be registered prior to any other programming of the lock.
Programming Troubleshooting Symptom Lock does not respond door is open and accessible. Lock does not respond door is locked and inaccessible. Unit is on for a while then shows no reaction. Lights dim. Unit chimes to indicate code acceptance, but the door will not open. Unit operates to allow access, but will not automatically re-lock. PIN codes will not register. Upon enterie) PIN code and pressin ✓ key, the unit displays "invalid code" error or lock times out with out responding.
Hardware Troubleshooting Cycle lock in both the locked and unlocked positions. If problems are found: Door is binding a. Check that door and frame are properly aligned and door is free swinging. b. Check hinges: They should not be loose or have excessive wear on knuckles. Bolt will not deadlock a. Check for sufficient clearance of the bolt within the strike-side jamb. Correct this by increasing the depth of the pocket for the bolt. b.
FCC: Class B Equipment This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
• New Door Marking Template I ~ "Yale· . For 1-3/4" 2-3/4" (70mm) Backset (44.5mm) Thick Door 1" (25mm) Dia. I@ w C. ~ / ,,,,.. (!) ' 1a: I , / ' / \ ,-- ~~--,~------------!--- ------,-1 -~- ct I /)/ 1" {25mm) Dia. 6o r~\ \ .....J 2 1/8" \ (54mm) , Dia . Thru Hole I I ~ J:llEffl -----1--- --------ct II / I I , /t=~F~or~1m_mYm8m"~ I (35mm) Thick Door \ ...
Preparing Door & Frame Necessary for new doors or adjusting existing prep. 2-1/8" ./(54mm) .J. Dia. ,.,, (25mm) Dia. 2-3/8" (60mm) or 2-3/4" (70mm) Backset Drill holes 1/2 way through door then complete from other side to prevent splitting. 111 (25mm) Dia.
Keyed Locks Check Your Door Guide Key Free Locks For doors with existing hardware Measure Clearance ✓ Greater tha1 ,A ···r It .:::-( .• ; r:. '' ... . I X Greater than D D a D 0 I (Your door is not ~ a match for a Yale electronic lock) • ~ a J Measure Door Thickness X Less than 8 (Your door i , not a match for a Yale electronic 11 >ck) 7 *Keyed locks are supplied with Screw Set D for 1-3/4" to 2-1/4" door thickness.
I 111111 lsl0I Il)0I IJ 1I1!al I 111111 1111131s1 15)81 I17!al I 111111 I 111111 I 111111 I 111111 I 111111 I 111111 I 111111 I 111111 I I 1/8 3/8 8 3 5/8 7/8 1/8 3/8 5/8 7/8 1/8 3/8 5/8 7/8 1/8 3/8 5/8 7/8 1/8 3/8 5/8 7/8 1/4 1/4 3/4 1/2 3/4 1/4 1/2 0 1/4 1/2 1 I AG E B--+C---+D Green Black Silver A. Minimum clearance between top of existing lever/knob rose (trim) and center of deadbolt hole. * B. 1-3/8" Door Thickness; use Screw Set B. Screws are tinted green.
Before you begin. Val~ Download the free BILT app for 3D. interactive installation tutorials. 'f . ~ , .• ~ Google Play Download installation manuals in other languages: YaleHome.com/Support Register your product and get 20%OFF~ Visit: YaleHome.com/Register Get 2O0/o0FF* at ShopYaleHome.
• ALERT IMPORTANT Information on Product Returns Call us first! We're here to help. For any technical questions or support, please call 1-800-810-WIRE (9473) for Yale Technical Services. Support is available: M-F 8am to 7pm EST Email: Service@YaleLock.com Download the free Bilt app for 3D interactive instructions GET IT ON ~~ Google Play • Ap;s;~~h; ISL- 1575-00 Rev.3 An ASSA ABLOY Group brand ASSAABI.