Owner's Manual

16 En
• You can transmit and receive the remote control signals
by connecting to the REMOTE CONTROL (OUT/IN)
jacks.
• Firmly connect monaural 3.5 mm mini plug cables
(commercially available) to the REMOTE CONTROL
(OUT/IN) jacks.
Do not connect the power cable of this unit until all connections
are completed.
After all connections are completed, plug the supplied
power cable into the AC IN on the rear of this unit. Then
plug into AC outlet.
TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH THE UN-INSULATED PARTS OF ANY CABLES
WHILE THE POWER CABLE IS CONNECTED.
OTHER CONNECTION
Connecting to the REMOTE
CONTROL jacks
CAUTION
REMOTE CONTROL IN REMOTE CONTROL OUT
To REMOTE
CONTROL
(IN) jack
To remote
control out
jack
To REMOTE
CONTROL
(OUT) jack
To remote
control in
jack
Monaural 3.5 mm
mini plug cable
(commercially
available)
Monaural 3.5 mm
mini plug cable
(commercially
available)
Yamaha
component
Infrared signal
receiver or Yamaha
component (such as
AV receiver)
Connecting the power cable
Note
To AC inlet
To AC outlet