0 Manual

Selecting the SCENE templates
Using remote control on the SCENE feature
■ Controlling the input source
components in the SCENE mode
You can operate both this unit and the input source
component by using the remote control. You must set the
appropriate remote control code for each input source in
advance (see page 53).
1 Press the desired i
remote control.
(SCENE button on the
■ Setting input source of the customized
SCENE template on the remote control
If you customize the input source of the selected SCENE
template, you must set the input source of the SCENE
template on the remote control to operate the input source
component correctly.
Press and hold the (DSCENE button and the
desired input selector button ((D) for 3 seconds.
2 Press the desired buttons in the * area below
to control the input source component of the
selected SCENE template.
Press the (DSCENE button again to operate the input source
component.
■SCENE buttons
Note
* These buttons control the input source component. See
page 51 for details of the function of each button.
28 En