0 Manual

Set menu
You can use the following parameters in set menu to adjust a variety of system settings and customize the way this unit
operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening
environment.
■ Basic setup
Use this feature to automatically adjust speaker and system parameters (see page 22).
■ Manual setup
Use this feature to manually adjust speaker and system parameters.
Sound menu 1
Use this menu to manually adjust any speaker settings, alter the quality and tone of the sound output by the system or
compensate for video signal processing delays when using LCD monitors or projectors.
Parameter Features Page
f -biui;fii<ii;f; set
Selects the size of each speaker, the speakers for low-frequency signal output, the crossover
frequency, and the location of the front speakers connected to the FRONT B terminals.
45
B 5 SB LEUEL
Adjusts the output level of each speaker.
46
5 SB DISThNCE
Adjusts the distance of each speaker.
47
D 5 UtN ! h.K bti.: !
Adjusts the tonal quality of the center speaker.
47
E 5 LEE LEUEL
Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.
47
F NjoNThNGE
Adjusts the dynamic range of Dolby Digital or DTS signals.
47
G 5 HUDIU SET
Adjusts the muting level, audio delay settings, maximum volume level and initial volume
level.
48
Input menu 2 INPUT
Use this menu to manually
IIENLi
reassign the input jacks, select the input mode or rename the input source.
Parameter Features Page
M.NHUI
.\^мgll^ ihc inpiil |ack^ 1)1) ihis unil accDiilmg Id ihc CDnipDiicnl Id lie u^eil.
B
Changes the name of the input source.
49
sUOLUIIE TRIM
Adjusts the output volume of each jack.
49
D
Selects the decoder mode for the sources connected to the DIGITAL INPUT jacks on the
rear panel of this unit.
49
EN1ULTI GH SET
Select the video source played in the background of the sources in put from the MULTI CH
INPUT jacks.
49
43 £n