0 Manual

3 OPTION MENU
Use this menu to adjust the optional system parameters.
■ Display settings
Dimmer
Use this feature to adjust the brightness of the front panel
display.
Control range:-4 to 0
Control step: 1
• Press ©<l to make the front panel display dimmer.
• Press ©1> to make the front panel display brighter.
■ Memory guard
Memory guard l :: :: : :
Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
Choices:
OFF, ON
• Select “OFF” to turn off the “MEM.GUARD” feature.
• Select “ON” to protect:
- sound field program parameters
- all set menu items
- all speaker levels
- SCENE template parameters
Note
When “MEM.GUARD” is set to “ON”, you cannot select and
adjust any other set menu items.
■ Audio select
Use this feature to designate the default audio input jack
select setting for the input sources when you turn on the
power of this unit.
Choices: AUTO, LAST
• Select “AUTO” if you want this unit to automatically
detect the type of input signals and select the
appropriate input mode.
• Select “LAST” if you want this unit to automatically
select the last input mode used for the connected input
source (see page
31).
■ Parameter initialization INI
Use this feature to set all the parameters of the sound field
programs to the initial factory settings.
Choices: NO, YES
• Select “NO” to cancel the parameter initialization and
return to the previous menu level.
• Select “YES” to set all the sound field parameters to
the initial factory settings.
Notes
• You cannot automatically revert to the previous parameter
settings once you initialize the sound field program parameters.
• You cannot separately initialize individual sound field
programs.
■ Bluetooth setting
Start pairing ::
Use this feature to start pairing the connected Yamaha
Bluetooth adapter (such as YBA-IO, sold separately) with
your Bluetooth component. For details about the pairing,
refer to “Pairing the Bluetoothadapter and your
Bluetooth™' component” on page 41.
To ensure security, a time limit of 8 minutes is set for
the pairing operation. You are recommended to read
and fully understand all the instructions before starting.
Select “START PAIRING” in “BLUETOOTH”
and then press ©ENTER to start pairing.
The connected Bluetooth adapter starts searching
Bluetooth components. “Searching...” appears in the
front panel display.
Check that the Bluetooth component detects
the Bluetooth adapter.
If the Bluetooth component the Bluetooth adapter,
“YBA-10 YAMAHA” (example) appears in the
Bluetooth device list.
Select the Bluetooth adapter in the Bluetooth
device list and then enter the pass key
“0000” on the Bluetooth component.
Once this unit completes the pairing successfully,
“Completed” appears.
To cancel the pairing, press (
“START PAIRING”.
)RETURN to exit fix
Press ©RETURN to exit from “START
PAIRING”.
Notes
If the connected Bluetooth adapter cannot find any Bluetooth
components, "Not found” appears.
If a Bluetooth adapter is not connected to this unit, "No BT
adapter” appears.
50 En