0 Manual

step 1: Set up your speakers
Place your speakers in the room and connect them to this
unit.
1 Place your speakers and subwoofer in the
room.
2 Connect speaker cables to each speaker.
Cables are colored or shaped differently, perhaps with
a stripe, groove or ridge. Connect the striped
(grooved, etc.) cable to the “+” (red) terminals of
your speaker. Connect the plain cable to the
(black) terminals.
3 Connect each speaker cable to the
corresponding speaker terminal on this unit.
© Make sure that this unit and the subwoofer are
unplugged from the AC wall outlets.
@ Twist the exposed wires of the speaker cables
together to prevent short circuits.
© Do not let the bare speaker wires touch each other.
0 Do not let the bare speaker wires touch any metal
part of this unit.
Quick start guide
Be sure to connect the left channel (L), right channel
(R), “+” (red) and (black) properly.
Front speakers
0
y
0
©
To the front right To the front left
speaker speaker
Center and surround speakers
To the center speaker
To the surround
right speaker
To the surround
left speaker
4 Connect the subwoofer cable to the input
jack on the subwoofer and the SUBWOOFER
OUTPUT jack on this unit.
5 En