Operation Manual

Making Global and Other Important Settings — Function
135
PSR-A1000
Entering Your Name and Language Preference — Owner
Restoring the Factory-programmed Settings of the PSR-A1000 —
System Reset
This operation lets you restore the PSR-A1000 to its original factory settings. These settings include System Setup, MIDI
Setup, User Effect, and Files & Folders.
I
F
J
G
H
81 2 3 4 5 6 7
Press this button to enter an Owner
name (for instructions on naming see
page 42). This name is automatically
shown when you turn the power on.
Determines the language used for the
display messages. Once you change
this setting, all messages will be
shown in the selected language.
I
F
J
G
H
D
A
E
B
C
81 2 3 4 5 6 7
These call up the corresponding Open/
Save displays. These let you store the
corresponding data as files for future
recall. From the PRESET page, you can
also recall the respective factory settings.
Restores the System Setup parameters to the
original factory settings. You can also restore
only the System Setup settings by
simultaneously holding down the highest key
on the keyboard (C6) and turning on the power.
Restores the MIDI
templates to the original
factory settings.
Restores the User Effects
(page 116) to the original
factory settings.
Deletes all files and folders
stored in the User page.
Executes the Factory Reset operation
for all items checkmarked above.
The functions and settings
below do not apply to the
Factory Reset operation.
However, you can restore
these to their original set-
tings by calling up the preset
System Setup files from the
PRESET page in the SYS-
TEM SETUP Open/Save
display.
Language
Owner Name
LCD Brightness