Operation Manual

PSR-A1000
136
Using Your PSR-A1000 with Other Devices
1 Using the Headphones
(PHONES jack).
A standard pair of stereo headphones can be plugged in
here for private practice or late-night playing. The internal
stereo speaker system is automatically shut off when a
pair of headphones is plugged into the PHONES jack
(page 133).
2 Playing the sounds of the
PSR-A1000 through an
external audio system, and
recording the sounds to an
external recorder (AUX OUT/
OUTPUT jacks)
You can connect the PSR-A1000 to a wide range of audio
equipment by using the AUX OUT and OUTPUT jacks.
Connect as shown in the illustrations below using
standard audio cables.
Before connecting the PSR-A1000 to other electronic components,
turn off the power to all the components. Before turning the power
on or off to all components, set all volume levels to minimum (0).
Otherwise, electrical shock or damage to the components may
occur.
CAUTION
1
LR
AUX OUT
(LEVEL FIXED)
MIDI
HOST SELECT
FOOT PEDAL
OUT
2 IN
MIDI
PC2PC1
Mac
TO HOST
DC IN 16V R L/L+R
OUTPUT
2
5
3
4
P.136
P.138
P.137
P.137
Use audio cables and adaptor plugs with no resistance.
When the PSR-A1000 AUX OUT and OUTPUT jacks are
connected to an external audio system, first turn on the power to
the PSR-A1000, then to the external audio system. Reverse this
order when you turn the power off.
CAUTION
LR R L/L+R
AUX OUT
(LEVEL FIXED)
OUTPUT
Audio cable
To powered speaker
RCA pin
plug
RCA pin plug
AUX IN
Cassette tape recorder
stereo system
Phone plug
(standard)
When these are connected
(with RCA pin plug; LEVEL
FIXED), the sound is output to
the external device at a fixed
level, regardless of the
[MASTER VOLUME] control
setting.
When these are connected
(with standard phone
plugs), you can use the
[MASTER VOLUME]
control to adjust the volume
of the sound output to the
external device.
• If you connect the PSR-A1000 to a monaural device, use only
the OUTPUT L/L+R jack.