Operation Manual

Using Oriental Scales – Scale Setting/Scale Tuning/Scale Memory
PSR-A1000
74
The scale settings you set (using the [SCALE SETTING] buttons or in the SCALE TUNE display) are memorized by the
Scale Memory function. Up to six scale settings can be stored for instant recall, whenever you need them.
The scale settings memorized to the SCALE MEMORY [1]–[6] buttons are saved as a single file.
Memorizing the Scale Setting – Scale Memory
1
Set up the scale settings as desired using the [SCALE SETTING] buttons or in the SCALE TUNE display.
2
While holding the [MEMORY] button, press one of the SCALE MEMORY [1]–[6] buttons.
The corresponding SCALE MEMORY button will light. Any data that was previously in the selected location
is erased and replaced by the new settings.
The memorized scale settings here will be lost when the power is turned off, unless you perform the Save operation (see next section).
Saving Your Scale Settings
I
F
J
G
H
BANK 01
All settings memorized to the buttons
[1]–[6] are referred to as a “bank.” The
banks can be saved to “USER” or
“FLOPPY DISK” as Scale Tune Bank
files.
Press the [DIRECT
ACCESS] button and [EXIT]
button to call up the MAIN
display.
1