SDS

江苏苏美达五金工具有限公司测试中心 SUMEC
Report Number:SUMEC-2020-011
Page 10 of 17 pages
变化较小的环境中。禁止将电池接触加热设备或将电池直接暴露于阳光中。
Precautions to be taken in handling and storing
Avoid mechanical or electrical abuse. Storage preferably in cool, dry
and ventilated area, which is subject to little temperature change.
Storage at high temperatures should be avoided. Do not place the battery
near heating equipment, nor expose to direct sunlight for long periods.
其他要注意的防范措施
拆解、挤压、直接放入火中或高温条件下，电池可能发生爆炸和燃烧。禁止短
接或将电池正负极错误的安装在设备中。
Other Precautions
The battery may explode or cause burns, if disassembled, crushed or exposed
to fire or high temperatures. Do not short or install with incorrect
polarity.
8. 接触控制/个人防护
Exposure controls/personal protection
呼吸防护：
当电池排气阀打开时，应尽量使通风设备开至最大，避 免将打开排气阀的电芯局
限在某一狭窄空间内。正常操作条件下，呼吸保护是不必要的。Respiratory
Protection
In case of battery venting, provide as much ventilation as possible. Avoid
confined areas with venting cell cores. Respiratory Protection is not
necessary under conditions of normal use.
通风条件
正常使用条件下不必考虑。
Ventilation
Not necessary under conditions of normal use.