User`s guide

18 SPARC Enterprise M8000/M9000 Servers Product Notes for XCP 1070 • April 2008
Sun SPARC Enterprise
M4000/M5000/M8000/M9000
Servers XSCF User’s Guide
Page 2-2 Section 2.1.1, “Setup Summary by the XSCF Shell.” Add
the following note:
Note - In addition to the standard default login, Sun
SPARC Enterprise M4000/M5000/M8000/M9000 servers
are delivered with a temporary login called admin to
enable remote initial login, through a serial port. Its
privileges are fixed to useradm and cannot be changed.
You cannot log in as temporary admin using the standard
UNIX user name and password authentication or SSH
public key authentication. It has no password, and one
cannot be added for it.
The temporary admin account is disabled after someone
logs in as the default user, or after someone logged in as
temporary admin has successfully added the first user
with valid password and privileges.
If, before the default login is used, you cannot log in as
temporary admin, you can determine if someone else has
done so by executing the following command:
showuser -l
Sun SPARC Enterprise
M4000/M5000/M8000/M9000
Servers Administration Guide
Page 8 “Logging in to the System” section. Add the following
note:
Note - In addition to the standard default login, Sun
SPARC Enterprise M4000/M5000/M8000/M9000 servers
are delivered with a temporary login called admin to
enable remote initial login, through a serial port. Its
privileges are fixed to useradm and cannot be changed.
You cannot log in as temporary admin using the standard
UNIX user name and password authentication or SSH
public key authentication. It has no password, and one
cannot be added for it.
The temporary admin account is disabled after someone
logs in as the default user, or after someone logged in as
temporary admin has successfully added the first user
with valid password and privileges.
If, before the default login is used, you cannot log in as
temporary admin, you can determine if someone else has
done so by executing the following command:
showuser -l
TABLE 9 Software Documentation Updates (2 of 3)
Document Page Number Change