User`s guide

Sun SPARC Enterprise M8000/M9000 Servers Product Notes 19
Upgrading From XCP 1041 or Lower
▼ To Prepare to Upgrade
1. Delete any routes configured on the lan#0 and lan#1 interfaces (failover
interfaces).
Note – The applynetwork -n command will not run unless some network
configuration has changed. Reseting the host name (sethostname) to exactly what
it is will prompt the command to run.
The following example shows two routes that must be deleted.
Sun SPARC Enterprise
M4000/M5000/M8000/M9000
Servers Administration Guide
Page 70 “About Auditing” section. Add the following note at the
end of the “Audit File Tools” section:
Note - This chapter describes how to set up archived log
files. The SP Security (SUNWspec) Package gives
administrators and service providers a means to view
those files. To display the XSCF audit log files archived to
your server, use the viewauditapp(8) and
mergeaudit(8) off-platform audit file viewers.
Sun SPARC Enterprise
M4000/M5000/M8000/M9000
Servers XSCF Reference Manual
adduser(8)
man page
The maximum length of the user name is 31 characters.
The adduser(8) man page erroneously documents a
maximum user name length of 32 characters.
Sun SPARC Enterprise
M4000/M5000/M8000/M9000
Servers XSCF Reference Manual
sendbreak(8)
man page
The sendbreak(8) command will not work when the
domain mode is set to on while the mode switch on the
operator panel is set to locked. Refer to the
setdomainmode(8) man page for more information.
Sun SPARC Enterprise
M4000/M5000/M8000/M9000
Servers XSCF Reference Manual
viewaudit(8)
man page
The viewaudit(8) man pages show incorrect output for
Example 5 and Example 6.
XSCF> applynetwork -n
The following network settings will be applied:
xscf#0 hostname :m8000-0
xscf#1 hostname :m8000-1
TABLE 9 Software Documentation Updates (3 of 3)
Document Page Number Change