User`s guide

22 SPARC Enterprise M8000/M9000 Servers Product Notes for XCP 1070 • April 2008
1. Log in to the XSCF#0 using an account with platform administrative privileges.
2. Verify that there are no faulted or deconfigured components by using the
showstatus(8) command.
If any failures are listed, contact your authorized service representative before
proceeding.
3. Power off all domains.
4. Confirm that all domains are stopped:
5. Move the key position on the operator panel from Locked to Service.
6. Collect an XSCF snapshot to archive the system status for future reference.
7. Upload the XCP 1070 upgrade image by using the command
getflashimage(8).
For example:
The XSCF Web on XSCFU#0 can also be used to upload the XCP 1070 upgrade
image. For more detailed information about using XSCF Web and the
getflashimage(8) command, see the Sun SPARC Enterprise
M4000/M5000/M8000/M9000 Servers XSCF User’s Guide.
8. Update the firmware by using the flashupdate(8) command.
Specify the XCP version to be updated. In this example, it is 1070.
XSCF> showstatus
No failures found in System Initialization.
XSCF>
poweroff -a
XSCF> showlogs power
XSCF> snapshot -t user@host:directory
XSCF> getflashimage http://server.domain.com/XCP1070/images/DCXCP1070.tar.gz
XSCF>
flashupdate -c update -m xcp -s 1070