User`s guide
26 SPARC Enterprise M8000/M9000 Servers Product Notes for XCP 1070 • April 2008
e. Confirm that XSCF#1 has entered the active state:
f. Confirm that no failures are found in system initialization:
22. Power on all domains.
23. Log in to XSCFU#0 and confirm all domains start up properly.
24. Check that there are no new errors.
■ In case an abnormality is encountered, take appropriate maintenance action
and contact your authorized service representative.
■ If no abnormality is found, proceed to Step 25.
25. Move position of the key switch on the operator panel from Service to Lock.
XSCF> showlogs event
....
Feb 26 16:10:28 PST 2008 XSCF#1 entered active state from standby state
XSCF> showstatus
No failures found in System Initialization.
XSCF>
poweron -a
XSCF> showlogs power
XSCF> showlogs error