Manual

CS00071
STOP
ChuteClean-out
Tool
,J
A chute clean-out tool is fastened to the top
of the auger housingwith a mounting clip. The
tool is designedto clear a chuteassembly of
ice and snow.
This item is fastened with a cable tie at the
factory.Cut the cable tie beforeoperatingthe
snow thrower.
WARNING: Never use your
handsto clear a cloggedchute
assembly.Shut off engineand
remainbehind handles until
all movingparts havestopped
beforeusing the clean-out tool
to clear the chuteassembly.
WARNING
Thissymbol points
out important safety
instructions which,
if notfollowed,could
endangerthe per-
sonal safety and/or
propertyof yourself
and others.Readand
followall instructions
inthis manual before
attemptingto operate
this machine.Failure
to complywith these
instructionsmay
resultin personal
injury.Whenyou see
this symbol.
HEED ITS WARNING!
Your Responsibility
Restrictthe use
of this power machine
to persons who read,
understand
and follow the warnings
and instructions
inthis manual
and on the machine.
3