Save This Manual for Future Reference Plate Compactors Operator’s Manual MODEL NUMBER YC1160 YC1390 SERIAL NUMBER PURCHASE DATE Both model number and serial number may be found on the main label (see Page 2, Figure 1a & Figure 1b). You should record both of them in a safe place for future use. FOR YOUR SAFETY READ AND UNDERSTAND THE ENTIRE MANUAL BEFORE OPERATING MACHINE Tame the Great Outdoors TM 29142US25M101.
Your new YARDMAX™ plate compactor offers quality construction, and is easy and safe to operate. With proper use and care, it is designed to give you many years of dependable service.
Plate Compactor » Operator’s Manual MODEL AND SERIAL NUMBERS Carefully read through this entire operator's manual before using your new unit. Pay attention to all cautions and warnings. This unit is a gasoline engine driven plate compactor. It is perfect for creating optimal density for the foundation of any paving project. It is easy and safe to operate. With proper use and care, it should give you many years of dependable service.
support Have questions about your YARDMAX equipment? Call us at 844-YARDMAX, email us at support@yardmax.com, or contact us via your favorite social media site. Specifications Model Number YC1160 YC1390 YARDMAX Briggs & Stratton Displacement 196 cc 208cc Start Type Recoil Recoil Compaction Force 2500 lbs 3000 lbs Blows per Minute 5500 5500 Plate Depth 14.5" 16.
Plate Compactor » Operator’s Manual Symbols The rating plate on your machine may show symbols. These represent important information about the product or instructions on its use. Read these instructions carefully. No smoking, sparks, or flames. Wear eye protection. Wear hearing protection. Keep your hands clear from all rotating parts. Wear protective gloves. Do not touch parts that are hot from operation. Serious burns may result. Wear safety footwear. Keep children and bystanders off and away.
PERSONAL SAFETY Do not permit children to operate this machine at any time. Keep children, pets, and other people not using the unit away from the work area. Be alert and shut off unit if anyone enters work area. Keep children under the watchful care of a responsible adult. Do not operate the machine while under the influence of drugs, alcohol, or any medication that could affect your ability to use it properly. Dress properly. Wear heavy long pants, boots, and gloves.
Plate Compactor Loosen the fuel tank cap slowly to relieve any pressure in the tank. » Operator’s Manual When fuel is spilled on yourself or your clothes, wash your skin and change clothes immediately. Never overfill the fuel tank. Fill the tank to no more than 1/2” below the bottom of the filler neck to provide space for expansion as the heat of the engine can cause fuel to expand. Store fuel in containers specifically designed and approved for this purpose.
CONTENTS SUPPLIED Your YARDMAX plate compactor comes partially assembled and contains the following: 1 2 OPTIONAL-SOLD SEPARATELY 3 HARDWARE KIT 6 4 9 7 5 8 1. Main Machine M10 × 30 ×2 2. Folding Wheels Kit 3. Handle 2 TOUCH-UP PAINT 4. Paving Pad (Optional-sold separately) 5. Clamp Plate (Optional-sold separately) 6. Operator’s Manual & Engine Manual Orange X1 Light Gray X1 3 7. Tank Cap (YC1390 Only) 8.
Lower Handle Plate Compactor » Operator’s Manual ASSEMBLY This plate compactor was partially assembled at the factory. To assemble your machine follow the below instructions. M10 × 70 (×2) HANDLE 1 1. U nfold the handle. (See Figure 2a) 2 M5 (×1) Upper Handle Figure 2c M5 ×1 M10 × 70 ×2 1 Figure 2a 2. Mount the handle as shown. Slide the handle ends into the engine deck slots. (See Figure 2b). Secure with the flat washers, nuts and bolts found in packet #1 of the hardware kit. 3.
2. Before compacting, fold up the Wheel Kit. (See Figure 3b) PAVING PAD KIT (OPTIONAL-SOLD SEPARATELY) The Paving Pad is for use on decorative and delicate surfaces like pavers, stone, and block. It prevents scuffs, scrapes, and cracking of the stones while using the unit, and also will help reduce operating noise. mm Attach the Paving Pad onto the Base Plate as 11 shown.
Plate Compactor » Operator’s Manual KNOW YOUR MACHINE FEATURES AND CONTROLS Throttle Control Lever Upper Handle Lower Handle Muffler Air Cleaner Oil Drain Hose Fuel Tank Belt Guard Exciter Base Plate Recoil Starter Handle Engine ON/OFF Switch Choke Control Fuel Shut-Off Valve YC1160PM01 - 1703 29142US25M101.
ENGINE ON/OFF SWITCH OIL DRAIN HOSE Running the engine with dirty oil can cause premature engine wear and failure. Changing oil regularly is extremely important. The flexible oil drain hose is equipped to drain oil into appropriate receptacle. (See Figure 6) The engine switch has two positions. OFF - engine will not start or run. ON - engine will start and run. RECOIL STARTER HANDLE The recoil starter handle is used to pull-start the engine.
Plate Compactor 1. T he engine must be off and allowed to cool at least two minutes before adding fuel. 2. R emove the fuel filler cap and fill the tank. (See engine manual for fuel capacity, fuel recommendation, and location of fuel cap.) » Operator’s Manual Throttle Lever 4. M ove the throttle lever slightly to the FAST speed.
While a certain amount of moisture in the soil is necessary, excessive moisture may cause soil particles to stick together and prevent good compaction. If soil is extremely wet, allow it to dry somewhat before compacting. ) position. 1. Move the throttle lever to the SLOW ( 2. Let the engine idle for one or two minutes. 3. Turn the engine switch to the OFF position. 4.
Plate Compactor » Operator’s Manual 10 mm Engine Mount Bolt (×2) 13 mm Figure 7a 11 mm 3. C heck the condition of the V-belt(s). If any V-belt is cracked, frayed, or glazed, it should be replaced as soon as convenient. 4. C heck the V-belt tension by squeezing them in the center. The normal deflection on each side should be 3/8"(9mm) to 1/2"(13mm) with moderate pressure from your thumb or finger.
6. S lip the old V-belt(s) off the pulleys and install the new ones in their place. LOOSEN 7. M ove the engine back by turning the adjusting bolts A until reach the right belt tension, Refer to the Figure 7b to check the belt tension. Then lock the jam nut B. TIGHTEN 8. Fasten the four engine mount bolts. 9. Attach the belt guard. When adjusting the belt(s), make sure that the clutch pulley is in alignment with exciter pulley.
Plate Compactor 5. R emove pipe plug from top of exciter housing. Tilt housing upside down so oil drains from exciter. Examine oil for metal chips as a precaution to future problems. (See Figure 9b) » Operator’s Manual Do not overfill - overfilling can result in excessive temperatures in the exciter. YC1160 YC1390 80 ml 100 ml Exciter Exciter Shaft Figure 9c Figure 9b 6. R eturn plate housing to the upright position. 8.
Remove the spark plug and drain all of the oil from the cylinder before attempting to start the unit after storage. 5. U se clean cloths to clean off the outside of the compactor and to keep the air vents free of obstructions. Do not use strong detergents or petroleum based cleaners when cleaning plastic parts. Chemicals can damage plastics. 6. P ull up the spring bolt and fold up the wheels bracket. (See Figure 3b, Page 9) 7. C arefully fold the upper handle down.
Plate Compactor » Operator’s Manual TROUBLESHOOTING Problem Engine fails to start Cause 1. S park plug wire disconnected 1. A ttach spark plug wire securely to spark plug 2. O ut of fuel or stale fuel 2. Fill with clean, fresh gasoline. 3. T hrottle control lever not in correct starting position 3. Move throttle control lever to start position 4. C hoke not in ON Position 4. T hrottle must be positioned at choke for a cold start 5. Blocked fuel line 5. Clean the fuel line 6.
PARTS DIAGRAM YC1160 19 | Parts Diagram 29142US25M101.
Plate Compactor » Operator’s Manual YC1160 PARTS LIST No. Description QTY. No. Description QTY.
YC1390 21 | Parts Diagram 29142US25M101.
Plate Compactor » Operator’s Manual YC1390 PARTS LIST No. Description QTY. No. Description QTY.
yardmax.com Tame the Great Outdoors TM 1850 W Winchester Rd, Suite 106 29142US25M101.indd 23 | Libertyville, IL 60048 | 844-YARDMAX (844-927-3629) | info@yardmax.