User`s manual

7 Serial Command Communications
7.7.7 JOG Speed Table Setup Commands
7-30
7.7.7 JOG Speed Table Setup Commands
The following table shows the JOG Speed Table Setup Commands.
JOG Speed Table Setup Commands
Serial Command Function/Description Positive Response
JSPDSTORE
JOG Speed Table Save
Saves the JOG speed table in flash memory.
Once JSPDSTORE is executed, the jog speed table will be
retained after the control power supply is turned OFF. Because
the JOG speed table is stored in flash memory, this command
must not be executed frequently.
OK
JSPDINIT
JOG Speed Table Initialization
Resets all values in the JOG speed table to their factory settings.
OK
JSPDTdd
JOG Speed Table Read
Reads the JOG speed table setting for the specified number.
dd: JOG speed number
JSPDT123 = 12345678 [CR] [LF]
JSPDTdd = nnnnnnnn
JOG Speed Table Write
Sets the JOG speed table setting for the specified number.
dd: JOG speed number
Settings: 1 ≤ nnnnnnnn ≤ 99999999
OK