User`s manual

1 Overview

1-2

1.1 Checking Products on Delivery

(1) When the INDEXER Module is Not Connected to the SERVOPACK

1. Mount the INDEXER Module to the SERVOPACK as described in the enclosed

-V Series

INDEXER Module Installation Guide (TOBP C720829 02).

For the location of the nameplate, refer to 1.3 Nameplate Location.

2. Check the nameplate to confirm that the product is the one that was ordered.

For the nameplate, refer to 1.2 Nameplate and Model Designation.

(2) When the INDEXER Module is Connected to the SERVOPACK

Check the nameplate to confirm that the Module that is mounted is the INDEXER Module.

The nameplate is located in the following position.