User`s manual

10.5 Alphabetical List of Serial Commands
10-31
10
Appendix
STI (±) nnnnnnnn Positioning Start (Relative Position) 7.7.2
STOP Program Table Operation Interruption 7.7.5
STS or MON6 Status Flag Monitor 7.7.8
SVOFF Servo OFF 7.7.1
SVON Servo ON 7.7.1
SVTYPE SERVOPACK Model Code Display 7.7.8
SVVER SERVOPACK Firmware Version Display 7.7.8
SVYSPEC SERVOPACK Special Specification No. Display 7.7.8
TREF or MON5 Internal Torque Reference Monitor 7.7.8
TRMppp= Temporary Parameter Write 7.7.3
TRMS Cumulative Load Ratio Monitor 7.7.8
TYPE INDEXER Module Model Code Display 7.7.8
VER INDEXER Module Firmware Version Display 7.7.8
YSPEC INDEXER Module Special Specification No. Display 7.7.8
ZONEINIT Zone Table Initialization 7.7.6
ZONENTzz Zone Table ZONEN Read 7.7.6
ZONENTzz= Zone Table ZONEN Write 7.7.6
ZONEPTzz Zone table ZONEP Read 7.7.6
ZONEPTzz= Zone Table ZONEP Write 7.7.6
ZONESTORE Zone Table Save 7.7.6
ZRN Homing Start 7.7.2
ZSET (±) nnnnnnnn Coordinates Setting 7.7.2
Serial Command Function Reference