User`s manual

4 Wiring and Connection
4.1.2 Connecting to SGDV-AE1A SERVOPACK
4-4
(2) Using a Single-phase, 200 V Power Supply
The Σ-V Series SERVOPACK for a 200-V power supply input has input specifications for a three-phase
power supply, but some models can also be used with a single-phase 200-V power supply. For details, refer to
Σ -V Series User's Manual Design and Maintenance Rotational Motor/Command Option Attachable Type
(SIEP S800000 60).
∗1. Use a 24-VDC power supply. (not included.)
∗2. Before connecting an external regenerative resistor to the SERVOPACK, refer to
Σ -V Series User's Manual Design
and Maintenance Rotational Motor/Command Option Attachable Type (SIEP S800000 60).
Note: The connections and wiring of the power supply of the main circuit and that of the controls differ in accordance with
the SERVOPACK to be used. For details, refer to
Σ -V Series User's Manual Design and Maintenance Rotational
Motor/Command Option Attachable Type (SIEP S800000 60).
Noise filter
Molded-case
circuit breaker
(MCCB)
SGDV-AE1A
SERVOPACK
Power supply:
Single-phase 200 VAC
RT
Protects the power
supply line by shutting
the circuit OFF when
overcurrent is detected.
Used to eliminate
external noise from
the power line.
Magnetic contactor
Turns the servo
ON and OFF.
Install a surge
absorber.
Motor main circuit cable
Encoder cable
Battery case
DC brake power supply
*1
Magnetic contactor
Regenerative
resistor
*2
SGMJV/SGMAV/
SGMPS/SGMCS
Servomotor
Used for a servomotor with
a brake.
Turns the brake power
supply ON and OFF.
Install a surge absorber.
(when an absolute
encoder is used.)
200 VAC
I/O signal cable
INDEXER Module
Personal computer
Connection cable
for personal computer
Digital operator
When not using the safety function, use the
SERVOPACK with the safety function jumper
connector (JZSP-CVH05-E, provided as an
accessory) inserted.
When using the safety function, insert a connection
cable specifically for the safety function.
Safety unit
Connection cable
for digital operator
Sequence I/O
signal cable
Host controller
Serial command
communications cable