User`s manual
5 Parameter Setting and Functions
5.3.9 Encoder Signal Outputs
5-12
5.3.9 Encoder Signal Outputs
The encoder signals can be used to monitor the servomotor’s speed and position. However, the INDEXER
Module manages the servomotor’s speed and position so it is not necessary to use the encoder signals to mon-
itor the speed and position from the host controller.
If an absolute encoder is used, the absolute position data is sent only once when the power is turned ON. Nor-
mally, do not use this signal.
For details, refer to the following manuals.
•
Σ
-V Series User's Manual Design and Maintenance Rotational Motor/Command Option Attachable Type
(SIEP S800000 60)
•
Σ
-V Series User's Manual Design and Maintenance Linear Motor/Command Option Attachable Type
(SIEP S800000 66)