User`s manual
5 Trial Operation (Checking Servomotor Operation)
5-8
3
Press the Key.
The display changes to the execution
display of Fn002.
4
Press the Key. "RUN" is dis-
played as the status, and the servomo-
tor power turns ON.
5
Press the Key to rotate the ser-
vomotor in the forward direction and
press the Key to rotate it in
reverse. The servomotor will operate
while the key is being pressed. (The
factory setting is 500 min
-1
.)
Confirm that the servomotor operation
is correct. At the same time, carefully
inspect the servomotor’s condition and
check the following points in particu-
lar. If a problem is found, correct it.
• Is there any unusual vibration?
• Are there any unusual sound?
• Is the temperature rising unusually
high?
6
After confirming that the servomotor is
running correctly, press the
Key.
"BB" is displayed as the status, and the
servomotor power turns OFF.
7
Press the Key to return to the
main menu of the Utility Function
mode.
(cont’d)
Step Display after operation Keys Operation
BB − JOG−
Pn304=00500
Un000=0 00000
Un002=0 00000
Un00D=0 0000000000
RUN − JOG−
Pn304=00500
Un000=0 00000
Un002=0 00000
Un00D=0 0000000000
RUN − JOG−
Pn304=00500
Un000=0 00000
Un002=0 00000
Un00D=0 0000000000
Forward
rotation
Reverse
rotation
BB − JOG−
Pn304=00500
Un000=0 00000
Un002=0 00000
Un00D=0 0000000000
BB
− FUNCTION−
Fn000:Alm History
Fn002:JOG
Fn003:Z− Search
Fn004:Program JOG