User`s manual
xiv
Maintenance and Inspection
Disposal
General Precautions
CAUTION
• Do not disassemble the SERVOPACK.
Failure to observe this caution may result in electric shock or injury.
• Do not attempt to change wiring while the power is ON.
Failure to observe this caution may result in electric shock or injury.
• When replacing the SERVOPACK, resume operation only after copying the
previous SERVOPACK parameters to the new SERVOPACK.
Failure to observe this caution may result in damage to the product.
• Be sure to eliminate static electricity before operating buttons and switches
inside the front cover.
Failure to observe this caution may result in damage to the product.
CAUTION
• When disposing of the products, treat them as ordinary industrial waste.
Observe the following general precautions
to ensure safe application.
• The products shown in illustrations in this manual are sometimes shown without cov-
ers or protective guards. Always replace the cover or protective guard as specified
first, and then operate the products in accordance with the manual.
• The drawings presented in this manual are typical examples and may not match the
product you received.
• This manual is subject to change due to product improvement, specification modifica-
tion, and manual improvement. When this manual is revised, the manual code is
updated and the new manual is published as a next edition. The edition number
appears on the front and back covers.
• If the manual must be ordered due to loss or damage, inform your nearest Yaskawa
representative or one of the offices listed on the back of this manual.
• Yaskawa will not take responsibility for the results of unauthorized modifications of
this product.
Yaskawa shall not be liable for any damages or troubles resulting from unauthorized
modification.