User`s manual

 Storage and Transportation

• Provide an appropriate braking device on the machine side to ensure

safety. The holding brake on a servomotor with a brake is not a braking

device for ensuring safety.

Failure to observe this warning may result in injury.

• Do not come close to the machine immediately after resetting a momentary

power loss. The machine may restart unexpectedly. Take appropriate mea-

sures to ensure safety against an unexpected restart.

Failure to observe this warning may result in injury.

• Connect the ground terminal according to local electrical codes (100 Ω or

less for a SERVOPACK with a 100, 200 V power supply. 10 Ω or less for a

SERVOPACK with a 400 V power supply.)

Improper grounding may result in electric shock or fire.

• Installation, disassembly, or repair must be performed only by authorized

personnel.

Failure to observe this warning may result in electric shock or injury.

• The person who designs a system using the safety function (Hard Wire

Baseblock function) must have full knowledge of the related safety stan-

dards and full understanding of the instructions in

-V Series User’s Man-

ual Design and Maintenance (SIEP S800000 45/46/60/64).

Failure to observe this warning may result in injury or damage to the product.

WARNING

CAUTION

• Do not store or install the product in the following locations.

Failure to observe this caution may result in fire, electric shock, or damage to the

product.

• Locations subject to direct sunlight

• Locations subject to temperatures outside the range specified in the storage/

installation temperature conditions

• Locations subject to humidity outside the range specified in the storage/instal-

lation humidity conditions

• Locations subject to condensation as the result of extreme changes in tempera-

ture

• Locations subject to corrosive or flammable gases

• Locations subject to dust, salts, or iron dust

• Locations subject to exposure to water, oil, or chemicals

• Locations subject to shock or vibration

• Do not hold the product by the cables, motor shaft or detector while trans-

porting it.

Failure to observe this caution may result in injury or malfunction.

• Do not place any load exceeding the limit specified on the packing box.

Failure to observe this caution may result in injury or malfunction.