User`s manual

5 FUNCTIONS

Monitor Code Name Unit Remarks (Factory Setting)

0010h Output terminal status

0011h — — —

0012h Motor exciting current

0.1% Motor rated secondary current: 100%

0013h — — —

0014h

Cumulative operation

time

1 hour

Function alternates according to the

setting of o2-08 (Comulatve operation

time selection).

0: Cumulative time when the Inverter

power is on. (factory setting)

1: Cumulative Inverter run time.

0015h to

0017h

Reserved — —

0018h Motor secondary current 0.1% Motor rated secondary current: 100%

* "00h" when the inverter control mode is set to V/f control.

Second Monitor Code

Monitor Code Name Unit Remarks (Factory Setting)

1000h PG counter 1 Enabled when PG card is installed.

1001h Fault alarm 1 Refer to page 31. —

1002h Fault alarm 2 Refer to page 31. —

1003h Fault alarm 3 Refer to page 31. —

M1-M2 output status ON:1

P1 out

ut status ON:1

P2 out

ut status ON:1

0 1234567

－－－－－

26 9 25

bit