User`s manual

INTRODUCTION

This User's Manual describes the operations and specifications of the CC-Link

Communications Interface Card (hereafter called the SI-C card). The SI-C card transfers the

data between the Varispeed series Intelligent Vector Control General-Purpose Drive and the

MITSUBISHI FA Field Network CC-Link (hereafter called the CC-Link). Read this manual

carefully and be sure you understand the information provided before attempting any

operations.

For the operation of the Inverter, refer to the instruction manual of the drive you are currently

using.

General Precautions

 Some drawings in this manual are shown with the protective cover or shields

removed, in order to describe the detail with more clarity. Make sure all covers and

shields are replaced before operating this product, and operate it in accordance with

the instructions in this manual.

 This manual may be modified when necessary because of improvement of the

product, modification, or changes in specifications.

 A new version of the manual will be released under a revised manual number when

any changes are made.

 Contact your Yaskawa representative or a Yaskawa office listed on the back of this

manual to order a new manual if this manual is damaged or lost. Please provide

the document number listed on the front cover of this manual when ordering.

 Yaskawa cannot guarantee the quality of any products which have been modified.

Yaskawa assumes no responsibility for any injury or damage caused by a modified

product.